The Baumatic 18 bottle thermo electric drinks cooler is a beautiful and sophisticated machine. It looks smart in any type of kitchen and does the job of cooling drinks superbly well.
It easily holds up to 18 standard size bottles of wine across five waved chrome shelves. The cooler is finished in black inside and out and has a reversible smoked glass door to the front.
An switch controlled internal light illuminates the interior and adjustable temperature guage allows to you store your wine at the temperature you prefer.
There is no fitted compressor so the machine is vibration free and operates very quietly.
Baumatic BW18BL 18 Bottle Thermo Electric Drinks Cooler
Summary of features
- Gross capacity: 50 litres
- Net capacity: 48 litres
- Energy efficiency class: C
- Noise level: 38 dB
- Fan assisted operation
- Thermo-electric ‘Peltier’ system
- Quiet operation
- No compressor (vibration free)
- 5 waved chrome shelves
- Adjustable temperature
- Internal light
- Tempered door glass
- Adjustable feet
- Reversible door (only from serial number: 10300001)
- Smoked door glass
- Black door frame
- Black interior and exterior
Dimensions of appliance**
Height: 645mm
Width: 355mm
Depth: 500mm
**When positioning, a small amount of additional space is required around the drinks cooler, see below.
Defrosting
Defrosting occurs automatically inside of the beverage centre during operation. The defrost water is collected by the evaporating tray and evaporates automatically.
The evaporating tray and defrost water drain hole should be cleaned periodically. This will prevent water from collecting in the bottom of the beverage centre, instead of flowing down the defrost drainage channel and drain hole.
You can also pour a small amount of water down the drain hole to clean inside of it.
You should be careful to make sure that bottles or cans do not touch the rear wall of the appliance, as this can interrupt the automatic defrosting process and deflect water into the base of your beverage centre.
Positioning
Positioning the appliance requires two people in order to avoid injuries or damage to the appliance.
Your appliance should not be located in direct sunlight or exposed to continuous heat or extremes of temperature (e.g. next to a radiator or boiler). If this is not feasible, then you should install an insulation plate between the appliance and the adjacent heat source.
You should check whether there is an electrical socket available, which will be accessible after your appliance is installed.
Place the appliance flatly and firmly on a solid base. The appliance is fitted with adjustable feet on the front side, which can be used to level the appliance.
**Anything positioned above the appliance must be at least 100mm away to allow sufficient cooling of the condenser. You must also allow a 100mm gap to the rear and a 50mm gap either side of the appliance.
Be sure to leave enough space for the opening of the door, to avoid damage to the appliance or personal injury.
IMPORTANT: The vent at the base of the appliance is for ventilation. Nothing should be placed in front of this vent; otherwise your beverage centre may not operate properly.
Price – £150 (subject to change)
